The Wio Terminal is a SAMD51-based microcontroller with a builtin display, various sensor buttons and a Raspberry Pi compatible GPIO. This guide gives examples on using the built in features with Adafruits CircuitPython
This project was designed to take some of the chaos out of mornings by helping to organise everybody while getting ready in the mornings for work, school, collage, appointments and take some stress away from being told how little time you have left. This is a Clock that organises everybody's tasks to get them out the door on time.
Track the International Space Station across the world using a WiFi enabled Pico RP2040 microcontroller.
Give your Raspberry Pi Pico a WiFi upgrade with the ESP32 WiFi co-processor and get connected with this CircuitPython setup guide. With an example of sending data with MQTT.
I have decided to try out a few i2c sensors with the Raspberry Pi Pico and see what the difference is to how I use them with a Raspberry Pi 4.
GPIO Pin layout cheat sheet for the Raspberry Pi Pico RP2040 Microcontroller
This little project is our home assistant. A Cat sitting on a Book with a Raspberry Pi mounted inside. This contains sensors, lights, a display, google assistant, music player and network Storage.
The AS7262 is a 6 Channel Spectral Sensor by Pimoroni that can be programmed in Python. This guide shows you how to setup the sensor on a Raspberry Pi and then how to use python to get the results.
CrowPi2 is a STEAM Educational Laptop using a Raspberry Pi, designed for learning programming and electronics through various built in sensors and electronic devices.
Keep your internet activity private and secure with a VPN on your Raspberry Pi. But which one to choose?
An easy installer script for my AutoHotspot and Static Hotspot setups. Allows a Raspberry Pi to automatically create a WiFi Hotspot when you are out or connect to your home network when you are home.
Trying out the SmartiPi 2 Case with the Raspberry Pi 4 and Raspberry Pi official 7 inch Display
MudPi an Open Source Smart Garden and Plant management and monitoring system for the Raspberry Pi.
This project uses an e-ink triple colour display on a Raspberry Pi Zero, to show the current location of the International Space Station (ISS), programmed in Python
Features and python setup guide to the Seeed Studio 2.13 inch Triple colour e-ink display on the Raspberry Pi Zero W
